The Latest Mountain Bike Tech Products & News! | GMBN Tech Show Ep.4

– Welcome back to the
weekly GMBN Tech Show. This week coming up on the show, we’ve got some information
about great tech products, and of course we’ve got
all the usual stuff. (ebullient music) Guys, so this week we’re going
straight in with Tech News. There’s a whole bunch of products
I’m going to tell you about. Seeing some of this stuff online, being sent some of these
really cool products, and I’ve also been to the U.K. Trade Show and checked out some in the flesh. So first up we’ve got the
O’Neal B50 magnetic goggles. So, that is your regular pair of goggles, but with like a magnetic lens system so you basically don’t
have to fiddle around popping lens in and out, which smears them and scratches them. They literally just pop on and off depending on which one you want. Now, I checked these goggles out, and they come in two options. They come in the standard, which just comes with a single lens, just normally mirrored lens,
and then there’s the Pro Pack. Now, in the Pro Pack, there’s
the googles, 10 tear offs, mudflap system, a clear spare
lens, a blue spare lens, a red spare lens, and a patch for it. Now, they’re really, really good goggles, and the lens real estate
they have is absolutely huge, so it is a lot of good vision for you. But they do come at a price. So, just the standard option, about 90 euros with a single lens, but the Pro Pack, you’re
talking just under 200 euros. Now, you know I’m all for the tech, but I’m very much of the opinion that goggles should be cheap. So that’s some information. Brand new news is Nukeproof have got the Horizon wheel set out. So Horizon is the
high-end range of prices. Your pedals already are
not clipless and flats. And then they’ve got these new wheels that come in 29 and 27 1/2, and both fit enduro and
downhill application. So, each hub and rim, they’re laced with Sandvik
double-butted spokes. They’ve got brass nipples, and each set of wheels comes
with eight spare spokes, so that’s really thinking of the end user. It’s an 84 point engagement with a 4.2 degree of pickup on there, and with 29 millimeter internal rims, and they’ve been developed
in conjunction with WTB, so you know they’re going
to be good quality stuff. Again, they represent really great value. A lot of the Identiti wheels we talked about in last week’s show, and the U.S. price for a
set of those wheels is $486, and the U.K. is about 350 quid, and in euro that’s 440 euros, so nice one to those guys for developing really good,
sort of flexible wheel package with a real nice, high-end feel. Next up, I’ve been getting
a ton of calls in Instagram. Now, Tyler is definitely one
of my stylish riders out there, and he’s been on GT for a while, and you know what he’s like on a bike, but he’s just released two
pictures of his new bike. Now, one of the things I
really like about his bikes is the black frames, and then he’s got the old
school-looking tan-walled tires. Now, somehow, even
though they’re not black, they do manage to make
a bike look quite mean and very long as well. But what I really like
is on his downhill bike. He’s got a pair of FOX
40’s on there painted red with Marzocchi Bomber decals on. Now as you know, the Marzocchi
group were purchased by FOX, so they’re kind of like
a sister company now, and they’re using the same factories and production facilities and stuff, and some of the riders like Tyler are having a bit of fun with that because I guess he really liked some roots of what Marzocchi did in freeride world, and he’s showing that off with
a pair of downhill FOX 40’s with Marzocchi getup on them. Check them out. And next up, I was checking on
Gee Atherton’s new race bike when I was at a cool bike show. Now, as you know, he’s on Trek, but he’s got a few different
sponsor changes for 2018. So the first immediate one
when you walk in through, and you see the bike, is
he’s got pair of Renthal bars and stem and grips on there. So it’s all changed, so
it’s a brand new setup out front for him there. Now, it’s kind of nice
to see him on the brand. It’s a British brand, and lots of racing history
and pedigree there, but of course, what he was
running previously was pro, and that’s Shimano’s
whole range of products. So, you look at the bike. He’s got no Shimano
products on there at all. So, he’s running a partial SRAM system, but also with Hope. He’s got Hope brakes
on there, Hope cranks, and he’s got a Hope seatpost,
so that’s a little trick, to combine it with a few
different extra things on there. We were looking at the tires on there. They’re Bontrager’s as well, and those things are super tacky. Like to have a look at
those at some point. So the next one is a bit of
a throwback for me, actually. Panaracer tire company have re-released or reissued the Smoke and
Dart tire combination. So, in the 90’s, one of
their tires that worked, like Farmer John’s Nephew’s
and a whole bunch of stuff that just simply didn’t
work with the Smoke. So the Panaracer Smoke was a rear tire, although when it first came out
they used it front and rear. Very open paddle-based
design, really good, and a lot of tires
today take a lot of that sort of information carcass
design straight through. Now Panaracer opened up the
Japanese original molds, and they’re remaking those exact tires. They’re not replicas. They’re exactly the
same as they used to be, and you can buy them in
regular 26 by 2.1 size and also the front
addition, which is the Dart. So, the idea between the two was, your rear ones were about drive and your front one was
about steering control. Really progressive design, and
it’s great to see them back, so I know there’s going to be
a lot of retro lovers out there getting those tires for
your retro bike builds, because tires of that year,
if you’ve still got them, they’re likely to perish, so
you can get brand new versions with tan walls, and it’s the real deal. So, a couple of weeks back on the show, I was asked about the Giro Chamber shoe, and of course that’s a
really popular shoe anywhere with a gum sole on it, and it
looks good, like a skate shoe, quite a robust thing. Now, for 2018, they’ve
got their new model out, so there’s a revised sole on there. The upper is slightly
more lightweight on it. It’s a bit of an improvement, and I actually think it’s
a really nice-looking shoe. Now, I didn’t get to
see all their colorways, but this is one of them,
and it’s pretty damn nice, I’ve got to tell you. But the shoe that
actually impressed me more was previously I had the Jacket, which was their flat pedal shoe, but it was a bit more of
just a trainer to start with, a bit more like a skate shoe. So, great if you work
in the bike industry. Perhaps you want something to wear to work that looks less like a cycle
shoe and more like a trainer, but not quite as good out on the trails. Now, the new one’s called
Riddance, and this is perfect for you flat pedal guys out there. So, it’s got kind of a mid cut. They did do a low one as well, but the mid is the real
mountain biker’s shoe. It’s got an upper strap for
keeping everything secure. You can tuck the laces under that so nothing’s going to get
caught in your drive chain. It’s got a slightly softer compound Vibram rubber sole on there that looks a lot better
than the first incarnation, which was a good sole, but this is certainly going
to be grippier on the pedal. Now, the inside of the ankle’s
got raised protection there as well for that dreaded
smash on the cranks, and they just look so nice. I want a set of those; they look wicked. U.S.E., which stands for
Ultimate Sports Engineering, are a company that have been on the
British mountain biking scene for many years, and they’re
already famous initially for making seatposts, and they
did them in anodized colors, and it was a single-sized post of different lengths available,
and you shimmed them out, and they sold the shims as well. Now, they’ve been really producing a lot of really, really cool stuff, but I noticed when I was
looking at their seatposts, they’ve got a brand new
post called the Helix, which is a dropper post. So it kind of felt logical
for them to do that, because they’ve kind of developed
this same sort of concept in the past with their
suspension seatposts. So, they already had the
telescopic thing down, but there’s more focus on
comfort rather than performance. Now the Helix post is
going to be available in 125 and 165 mil drops and the usual 30.9 and 31.6 mil. They did tell me that
there’s going to be a 27.2 at some point down the line, but due to the narrow size of that, it’s going to take a
little bit more refining just to make sure they’re happy with it before it goes to production. The operating lever
itself kind of reminds me of the Crankbrothers one, really
nice position on the bike. You’ve got the barrel adjuster on there, and a slotted ball socket so you can move it around
to your preferred position. But the thing that’s
really cool about the Helix is it’s got a clutch design
inside so it’s infinite drop so you can have it wherever you want, and it’s actually got a return
adjustability speed on it for the air valve that’s
just under the seat clamp, so you can adjust how fast
you want it to come up. Personally, I like them
the faster the better so it can constantly
adjust while I’m riding. Some people don’t like that. They want it to be a bit slower. With the U.S.E. Helix,
you can pick it your way, so that’s a really nice product. Now, it seems these days that everyone likes to strap
more stuff to their bikes and carry less on their person, and that’s kind of been led by the racers of the Enduro World Series,
and for good reason as well, because that stuff, for example, like an inner tube that is just strapped under your saddle rails or on the frame. It’s really fast access. You’ve got a puncture, you
can get it done super fast, get back on the trail. Now, I was checking out this Cannondale, and Cannondale’s got their own little sort of retention straps
now to hold an inner tube, couple of CO2 cartridges, just in the sort of
nook of the frame there. That’s really neat, but I also noticed on this
particular one at the show it had the Fabric cageless bottle, but under the cage mount,
they had a pump bracket, and the pump bracket seemed to hold perfect-sized Fabric
tool on there as well. It was just a nice example of
carrying everything you need on the bike, nothing on your
body, hit the trails free. It feels really good. So, we’ve been using Ergon
grips here for some time, and I’m quite a big fan of
them, especially the GD1’s. You can get them in different sizes, so whenever I ride broad places
like Whistler or the Alps, I like to go for the bigger grips. It’s a bit more comfortable ’cause I did have a previous wrist injury, so it flops around a bit, and sometimes I have to
wear a wrist support. So, I’m always looking
out for the next thing, and I’ve got a new grip called the GA3, which has got a slight
wing on the back of it. Now, Ergon used to make
a lot of comfort grips for the commuter bike market and endurance cross-country sort of grips with built-in bar ends
and those sort of rings. Now, this is new Enduro’s old
mountain version of that grip. So, it’s a high-performance
grip made out of soft rubber with various different options available, but it’s got this wing on it. Now, a lot of riders are not
going to like this sort of thing, but personally, it looks perfect to me, so I’m going to get a set of these, and I can actually see myself
having that on the right and the GD1 on the left. Just a little bit of support
for the heel of my hand where I need it, so just
something to factor in if you have got any sort
of injuries yourself. Okay so now it’s time to look
at what you were talking about on last week’s show, so
comments sent out to you guys. Of course we were talking
about what sort of bike tech do you take for granted
and what stuff do you think that you can’t live without. So first up, Bike MTB
says, “I think suspension “is the best thing to mountain biking “as you can unscrew your saddle
or pull your brakes harder “but nothing helps more
on a black rock garden “than a 150 mil front shock. “My arms thank the inventor.” Yeah, do you know what? I do agree with that. Suspension is phenomenal,
what you can do off-road, but I stand by my
original thought, though. I think the dropper post
is actually more beneficial in the long run, because you have a dropper
post on a rigid frame, and it really helps
your ability to get off away from the saddle, keep
your center of gravity low. But of course, this is a preference thing, and that’s why we’re talking
to you guys about it. In response to yours,
Bike MTB, says Aljowen, “With rim brakes you can’t
just pull them harder. “If they get wet and muddy,
you are not stopping, “no matter how hard you pull.” Do you know what? I remember the terrifying days
of really poor rim brakes, especially cantilevers. Flying downhill, you reach for the brakes, and literally for a split
second, nothing happens. Oh god, never again. Give me disc brakes any day. Water Bottle. “I don’t have any of
that tech that you named. “I live without all of it. “I’ve got a hard tail with
60 milli front fork travel. “Yeah, it’s bad. “Yeah, there’s horrible
v-brakes and no dropper post “and flat pedals. “But I go out and ride
every trail possible “every minute I get.” Yeah, you know what? That’s the best way to be. Tech doesn’t actually matter
at the end of the day. There’s all this stuff that we like to enhance the way we ride, but you don’t need any of this stuff. You can just get out and ride on any bike, so that’s a great response. I like that. Tom Eikelenboom. “Hey Doddy, can you do a video “about hanging your
three by nine drivetrain “to a one by 11 drivetrain? “Great video, keep up the good work.” Yeah, actually, that’s a really good idea. I’m definitely going to do that one. I’m going to get a few
more budget bikes in and show how to get the best
sort of maintenance stuff and how you can improve those bikes and make them better for you guys. So, doing three by nine to
one by 11 is a great thing to do when you’ve worn
out your transmission. You don’t want to do it straightaway ’cause it’s just going to cost you money, but in the long term, you’re
going to get a good range of gears but also save a bit of
weight off your bike, so we’ll definitely do that one. Florian. “My dad told me a while
ago, about ten years back “when he bought a simple hardtail, “he had the option to get
Shimano Deore XT dual control. “Could you tell me a bit about this “’cause it seems very unconventional. “Love them videos, by the way.” Well, thank you for the
video comment, that’s great. Shimano dual control, yeah. I think that one’s firmly gone. So, in the road world, you
have your brake lever hoods, and then on the hoods, when
the lever dangles down, you can change gear by pushing
the shifter in and out. And Shimano thought it was a good idea to bring this to the mountain bike market. And whilst they did work really well, you’ve got to bear in mind that when you’re riding
in an off-road situation, you need your brakes to pull in like this. As soon as your fingers
are dangling around and bumping up and down
in a rough terrain, so easy to change gear accidentally. After this, the fact
it were to rapid rise, so you changed gear the
opposite way around to normal, so let’s just think about this. So, if you change a gear
normally, you’re clicking down, you’re expecting it to drop one way. Clicking up, you expect it
to put up the other way. You imagine that working
the opposite way around. That combination with the dual control, bit of a nightmare, to be honest, although I do know two riders
who still use that stuff and swear by it, and one of the things I
do like is the rapid rise. Actually, it makes it really
easy to change gear up into a lower gear when
you’re riding up steep hills because the spring works
with you, not against you. So, pretty cool stuff, but I
think that’s done and dusted as far as the mountain bike world goes. If you want to have shifters
that work in that sort of way or integrated into the bar, grip shift is really the
better option, I think, and it weighs virtually nothing. Liam Moore. “If you are building your
own bike cave as you say, “you should do a series of
videos about building it.” Yeah, actually I’m just going
to throw you to something now. Okay, so welcome to my
unfinished workshop. I’m still working on it. As you can see in the corner,
I’ve got stuff like the boiler boarded up in here. My bikes are going to be on this wall. I’ve got this really cool
industrial rubber flooring. It’s chemical-proof and all that stuff. I’ve got a workbench all
the way along the back here, L-shaped. Having a sink on the top, washing machine, dedicated for bike stuff here. All the tools and that stuff. Outside I’m having a hot and
cold temp with a hot showerhead so I can get clean before
coming into the house. And then up here, this is going
to be a plasterboard ceiling. Hard to imagine as it is, but
it’s going to have lights, and we’ll have hanging
stuff on there as well. And then I’ve got a bit
of storage up here as well for whatever’s boxed up. But I’ve actually been lucky
enough to build this place. It was an old coal bunker
with an outdoor toilet, and that’s the last remnants
of what the toilet was. So, to have a dedicated workshop, that kitchen window came
from what was the old kitchen in the rest of the house, so we’re recycling
everything we can as well, and all the bricks used to
build this are from other parts of the house that we knocked
down during the building, so pretty cool. And I’ll present an episode of GMBN Tech Show from
here when it’s done. But that’s all you’re seeing for now. Nice. And the last one of
all, this is a big one. So Thomas Vanosmael says,
“Doddy, I am a father “of five children. “The oldest is 12; the youngest is three. “I’m having a hard time
finding good mountain bikes “for kids. “We, I, need better kids’ bikes with parts “we can replace and maintain “so I can pass on my oldest son’s bike “to his younger brother. “Even for children, “a good lighter bike
makes a lot of difference. “Things I upgrade are a one by 11. “I mean, three by nine
and square bottom bracket “is just horrible and heavy. “Better brakes, better rubber. “Am I a snob?” No, you’re not at all, actually. So, you bear in mind how much
stuff is on a mountain bike. When you want to try to
get that price point down, and sort of compress them for kids’ bikes, you’re left with what fundamentally
is a really heavy bike. So, there are a few bike brands out there that simplify this and do
this specifically for kids. There’s a brand called IslaBikes, and that stems from Isla Rowntree. He used to be a cross-country pro rider, and he dedicated himself to
making the best kids’ bikes from the early sort of walk-around bikes all the way up to like
26 inch wheeled bikes. Now, check some of these bikes on screen. They’re developed specifically
and specced for kids and lighter riders. Also, British brand Hope. They’re famous for their
brakes and their anodized bits. They’ve got a thing
called the Hope Academy. Now, on the Hope Academy is a subscription-based
bike sales service for kids. So, the idea is you buy
a bike for your kid, it’s obviously quite a high-end bike, so it’s a lot of money, but you subscribe, so you’re paying a monthly cost. When your child grows out of that bike, you simply trade it in
for the next size up, and then they service the bike
and it goes to another kid. So, you’re constantly paying a fixed fee, and you’ve got the option of
chopping and changing bikes as your children grow. Now, that is a really cool service, and I’d actually like to see
that implode from more places because getting kids on bikes
is a really expensive thing, and not everyone can
afford to, as you are, converting kids’ bikes
with really good stuff like one by 11. I think kids should
have that sort of right to have a decent bike and not be stuck on something really heavy in the future. Okay, now it’s time for Bike Cave. You guys have been flooding us again. Can’t get you all in
this show, unfortunately, but we are going to start
putting some of these on our Facebook page,
so keep your eyes peeled if you haven’t made it in. So, our first up is Colin Smith. Oh, nice, oh, you’re got
a dog in there as well. Blake would love you if he was here. Nice, tidy bench set up. Nice. Oh, a bit of an old school
Porsche in the background there. Bit of biking memorabilia,
tires, 661 helmets. Nice. I particularly like your workbench setup. That is pretty industrial. He’s even got a sofa. So you can have a power
nap if you need to. So, Dan Whittly from Plymouth is next. Oh, that is nice. What’s he got in there? A new Nukeproof Scouts? Two of them. Oh man, you’ve got some nice
bikes hanging up in there. Next up, I see you got some kids’ bikes. Good man. Bringing in the future of
mountain biking right there. E.J. Bosley. Ohhh. Now, that is a crammed workshop. Race plates in here. Oh, I see some Gorilla tape right there. Paint. He’s got all the lubes
and stuff in the world. Shimano mineral fluid. Nice, you’re definitely
into your home mechanics if you’ve got all that gear. Even got envelopes. Santa Cruz 5010 parts. Santa Cruz HR, it says. Oh man, I love your setup. There is so much going on in there. I could spend a lot of time. Quite therapeutic in a place like that. Next up we’ve got Matthew
Logan from Northern Ireland. “Taking over your dad’s garage.” Yes, that is the way. Man, you’ve got some sweet bikes in there. You’ve got YT and a Cove. Nukeproof up the back. Man, how many bikes have you got? All right, a good amount of tools as well. I see some Stanley stuff down there. A roll cab. Decent tool board. Man, you’ve definitely done
your dad’s garage justice. I can see some Alpinestars
boot set and motocross tire. Mmmm, looks like you’re into
some other good stuff, too. Marko Richer. “Hey, GMBN, I love the show
and everything about it. “For my setup, I’ve had to
deal with a small space, “so I’ve had to work
out a double duty unit, “so I’ve got a storage unit for my gear “and put it on rollers and
screwed in a pegboard.” Oh man, this is great. So the front side of this unit
is your regular sort of unit. You can put it up on its end
for storing all your stuff in, and you flip it around, and it’s a pegboard with your tools on. That’s a hack and a half. Fact, that should be a Top Mod. That is really good. Even the workspace as well. Bike Cave meets Top Mods. Mountain Brothers. “Here’s my bike cave. “I’ve got a Commencal HT
all mountain race in it, “two fixed gear bikes, a
trials bike, and a BMX. “What else should I add?” Dude, you could almost
have an indoor track there. Look at the size of that
garage; it’s massive. You definitely need some posters
and some artwork going on. I reckon a sofa in there, and judging by the amount of bikes, you get a beer fridge in there, too. You could turn it into a proper den. Really into that. Definitely get some color in there. Get that one nailed. What else have we got? Oscar Burgess. “Love the new channel. “Here’s my Bike Cave which
also doubles as a home office.” Well, what he means is it’s a bike cave, and he just stuck a
computer in the corner. Man with good priorities there. He’s got a wheel jig as well. Whoa, definitely into home tinkering. Nice. Like the Orbea as well. It’s a really nice color you’ve got there. Sweet. All right, last one is from Tony Chambers. “Think I need to tidy up again.” No, you know what? You don’t need to tidy up that. It’s wicked in there. Loaded. Oh, I can see a GMBN sticker
on the cabinet as well. Oh, good man. Nice Santa Cruz you got there, too. Sweet. Love seeing those. Make sure you keep firing
in your Bike Cave entries. Use the hashtag when you add
them in on the comments below and when you fire them in
on email, and of course, tag us on Instagram or Facebook as well. Love seeing that stuff. Okay, now it’s time for Rewind. This is a retro corner of the show where we check out where
stuff is coming from and where it is going to,
the development of parts, and of course, all your retro goodies. And we’re still getting so many in that I’m going to be able to have a break from telling you guys about this stuff because I’m just enjoying
what you’re sending in. So first up this week from Aaron. Aaron in Portsmouth actually,
I recognize your name and what you said about your Orange G2. I remember you entered
that into Bike Vault when we gave that. It was super nice because I remembered the
XT Shark Fin on there. So, it’s pretty cool that
you’re sending in some stuff, and the first one is your
Bullet Brothers chain tensioner, so if you imagine pre-clutch mech days, this would basically go
underneath your quick release on the back of the
bike, poke out the back, and that spring would hold
the cage of the mech up to give you loads of supreme chain tension and really silence the bike, help stop the chain coming off. It worked really well,
but there’s a downside. They would nick at the springs in your rear mech after awhile, because there’s so much more
friction going through it. And also if you remember,
using those in the long term, it would actually make it
really hard to change gear with your thumb because you’re fighting
that really powerful spring that comes in there. But great trip down memory lane. Next up are a pair of
Shimano Deore thumb shifters. Seven speeds, oh man, I
remember those things. It’s funny because really
good memories of it but I did use some thumb
shifters there for a time, and it’s just, they’re
pretty crap, really. You know, but they were
so good at the time, and they worked really well. Next one I absolutely love. A Gorilla fork brace. So, this is like a brake booster. Back in the day when you started using more
powerful cantilever brakes, what would happen on bikes is
the force in the chain stays sort of forcing the seat
stays or the fork apart, so much so that your
brake could feel spongy. So, to retain that positive feel that you want for your brakes
to get the most of your power. Lot of after-market companies of Gorilla, and Odyssey used to do them as well, made these brake boosters
that would go on the front. Now, they basically have big bolts that go straight through your brakes and into the brake buses
and hold it altogether. Really nice, but they used to clog up. Do you remember that? Never that good, that was. Next up we’ve got Greg Supelak. His more retro ride, a 1998 Kona Stab. “It’s a bit of a crossover
into your scratch build topic, “’cause I built the frame up, “sourcing all original parts online.” Yet you know, I remember
these things as clear as day because I used to have kind of a Stinky which came out just before these. And the Stinky was like a five
and a half inch wheel travel, but Stab, I think, was six,
and it was loosely based around this turn of suspension system, although Turner used to have that FSR link on the chain stays, whereas the Kona uses the
four-bar style seat stay pivot. So, it’s not quite as active, but look at that paint job on that. It’s got the old flames. He’s got a big headtube gusset. Is that a FOX or is that a Noleen shock? I’ve got a feeling it might
have been a Noleen on those. They’ve got Junior T’s up front. Man, those things were so
nice when they came out. Super plush, and also notice on the front. You’ve got big Azonic stem on there, so they called it Shorty, but ironically, it’s a lot longer than
the short stems of today. I see some Yeti handlebar grips on there. Azonic risers, Magura. Don’t know if they’re HS 33’s
or not, but Magura hydraulics. And then they look like Mavic
rims to me, the CD finish. When they wore, they’d be 131’s, maybe? Nice. Nice effort, really into that. Next up, Tom Jackson. Ah man, 1994, Fat Chance Buck Shaver. That is seriously nice. XTR on there. He’s got Smoke and Dart tires on there. That’s probably from
the first time around. That’s pretty cool to see those. Those are the tires I
talked about in News. And what pedals are on there? He’s got some sort of
gnarly-looking old pedals on there. Syncros stem, Pace RC35
for the reverse fork arch. Nice wishbone on the frame. That’s a really, really nice,
all handmade steel frame. Well into that. Tony Spalding is next. “Firstly, guys, your show is great. “Informative at all levels. “I thought I’d send this
picture in for Tech Rewind. “It’s me racing in the early 90’s. “Yes, I’m old.” Nice work. He’s riding a Rocky
Mountain Blizzard here, so that’s really cool to see. In fact, I was looking at Rocky Mountains, literally the other day,
so if you look on screen, you can see a Rocky Mountain Blizzard. I managed to find one from
’96 and another one from ’93. I think your one, it’s hard to tell there, but it might be about ’95
or something like that, although you could say early 90’s. But that’s great to see you out riding, even though you’re doing that thing that we always did back then. You’ve got city shoes on. You’ve got a Specialized
top, Specialized helmet, and you’re riding a Rocky Mountain. What’s that all about? Either way, you look so rad
to see you out on a bike, and I did like the way you
said, “I detest road cyclists “as I’ve always been a mountain biker, “but I’ve now got a road
bike last year for sprints “and for my own training. “You’ve got to get Doddy
out on one for the show. “I’m sure he can do it.” Yeah, do you know what? Like, I’m not a stranger to road bikes. I used to race cross-country. I used to train on a road
bike when I was a lot younger, so I do know what it’s
about, and it’s fine. It’s just, to be honest, my
riding time, like most people’s, is pretty limited, and if I
get a chance to ride in a day, I’m going to ride a
mountain bike every time even if it is on the road. I just love them. So, straight to Top Mods,
and I’m really impressed. They’re flying in now, and they are ranging
from all sorts of stuff from just putting some
tape on your chainstay to silence your bike to crazy cab design stuff,
so I want to see them, everything you can possibly send in. Keep them coming. In the meantime, I’m
just going to throw you to two really particularly
interesting ones this week. So the first up is from Stewart, and it’s with his 1995 Kona Explosif. So, kind of a retro bike
from Rewind as well. And he’s been building it
up into a retro trail bike. One of the problems, though, is it didn’t have disc brake tabs, and he wanted to put disc brake on it, so instead of welding a tab on the bike ’cause he might’ve wanted to return it to its older period correct build, he’s made his own 3D cab model
of the frame with a scanner and made a bracket to fit, and he’s also done FEA testing to see if it’d be strong enough. Now, this is insane, the detail some people go
to, to put disc brake on. But I don’t blame you. I wouldn’t run cantilever
brakes ever again. So, that is like, really, really good, so. I guess that’s a hack,
like, rather than a mod, ’cause you’ve definitely
improved something that was okay, and you’ve made it better. Next one you’ve come up
with a number plate mount. Now I’m really into this because
number plates when you race can be a pain. You’re just putting it on with cable ties, and they’re really messy. I like the fact you’ve used
reflector brackets on there. It looks really clean and tidy, and I guess you could reuse the bracket, and just put your next number
plate on for the next race in the same way. That’s a really good mod,
and I think I should look. You guys that might race
want to have a look at that. And the next one. This is a particularly long story, so I’m only going to put a
little snippet up here now, but I’m going to put the
full letter on Facebook, because this is a bit of a crazy story. So essentially, says Philip
Martin, and he’s from Innsbrook. He’s 30 years old, and he
works as a medical doctor. In 2016 he had this massive
crash, and he broke his back. So, he broke his collarbone,
his shoulder blade, some ribs, and also two vertebrae, L1 and L4. So the fracture of his lumbar
vertebrae one was so bad and unstable, they had to go into surgery and basically bolted some
of his vertebrae together so his lower back was
bonded for eight months. So after a five month recovery,
he the all the pins removed from his collarbone
and his back and stuff. And the doctor asked if he
wanted to keep some of the metal. So he obviously knew what he
was going to do with that, and he cut some up and made
this little mod for his Reverb. So he’s basically got part of the bolt nut that he carried in his
back for eight months. With a bit of resin, he’s put
it on his dropper post remote so not only is it a little
reminder of how lucky he was to survive that thing and
still be riding a bike, but it’s actually really functional because he’s added more
attraction to the dropper post. That is one of the best
mods I’ve ever seen. But to top it off he’s done
something even better than that. The helmet he wore in the
crash that arguably saved him, he’s turned that into a lamp. So he’s got one of those
really cool Edison bulbs that look really fancy, but
it’s LED ones that don’t heat up and he’s got that as his kitchen
lamp at his kitchen table. That is just absolutely brilliant. But check out on our Facebook page. You can see all of his pictures
and read the full story. There’s a lot of detail to it, and he’s really inspired by Martyn Ashton, like a lot of other people that have had to cope with
really severe injuries. Definitely have a look at that. So Tech of the Week, this week, directly relates to
modern progressive bikes. And what I’m saying by that is they extended wheel-based bikes with a longer reach on them. So, I’m talking about bikes
like the Nukeproof Mega’s, the Mondraker’s, the Pole
bikes like the Machine. There’s a lot of them, and
it is getting more of a thing that people like to size up, so that means having a longer reach bike and then shortening the stem length. Now this actually came from Mondraker, who developed this system first. When they put out this crazy little stem. That’s effectively a 10 millimeter stem, and the way they got around that was, let’s just say the bike was a size medium. The front end would actually be for large, X or an XL of a normal bike, but it would have the medium height, and then to bring the handlebars
back into the same position you would normally have,
they have this tiny stem. So you’re not just putting this short stem on any old bike to get that feel. You’ve got the bike that fits
you properly in the cockpit because of the stem, and you’ve got this really
good direct response, and the steering just feels unbelievable. Now, these are, like, really
cool, but the downside of them is that you did have to
trim down your steerage tube and commit to it, because
they sit on top of it. It was the only way to
get them that short. Now, as things progressed,
other companies came up. Renthal got this. Race Face made them, Easton, to make this very expansive,
make these tiny little stems. And this is a 30 mil stem, and that’s as short as you can possibly go without interfering with anything. But a tech I want to talk to you about is the Pacenti PDENT system. So, it looks like a regular set of bars. So, right about a 15
mil rise, 25 mil rise, and they’ve got a five degree angle, and they’ve got seven degree backsweep. It’s carbon fiber bar,
but the cool thing is, the stem is only 20 mil. How do they get around that? Because of the profile. That sits around your steering tube. It can still allow for a
certain amount of movement for setting up the roll of the bar. I’ll show you in the stem, there. You’ll see it doesn’t interfere
with the steerage tube. You’ve got this tiny little compact setup. It’s one of the nicest-looking
solutions I’ve seen and certainly a lot nicer than the original sort of pioneering stuff that Mondraker did. Granted, they’ve done
that stuff, but Pacenti, look to what they’ve done. They’ve taken it the next step forward. That is progression. That is a really cool bit
of mountain bike tech. So, that is the end of
this week’s GMBN Tech Show. I hope you enjoyed the ride with me. It’s been really good fun. So, make sure when you’re commenting, and you’re sending emails on
the address on the screen there that you use the hashtags,
’cause it makes it a lot easier for me to get that stuff faster, and that means it’s more likely
to be on the show next week. So the hashtags are #bikecave, #rewind, that’s for the retro. I know a lot of you send that
stuff in, and you say retro. Just #rewind, that means
I can find it like that. And then of course, #topmods. Keep that stuff firing in, and hopefully you guys will
make it on the show next week. If you want to see a couple
more really useful videos. Click up here if you
want to see Blake’s video on how to jump doubles. Don’t we all want to jump? That is the video. That is the one that
teaches you how to do it. Now, for four ways to maybe
improve your winter riding, click down here. As always, click on
the globe to subscribe. Tell all your friends about the channel, ’cause hopefully we’re going
to be able to help them out with some really good tech info. And of course if you like the
video, give us a thumbs up.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Post navigation

100 thoughts on “The Latest Mountain Bike Tech Products & News! | GMBN Tech Show Ep.4

  1. My riding buddy has the Shimano dual control on his 2010 carbon trance and he rides that bike whenever we go hit the trails #rewind

  2. @gmbntech any more updates on air volume reductions on a rockshox recon fork? I remember a few weeks back you mentioned that you were investigating it and it's something I'm super interested in exploring myself, thanks for the great content! #topmods

  3. Would you really rather a rigid bike with a dropper post than suspension? You wouldn't really prefer that on a world cup downhill course would you? As opposed to say, a full suspension bike and taking less than 20 seconds to manually readjust your seatpost?

  4. I still have a pair of XTR M965 , which are also DualControl . I love these and they never let me down so far at smashing the XC Trails and Tours with them 😀

  5. Other people may agree or disagree with this but I don’t think I could live without gear shift levers because I find grip shift really annoying when I ride a bike with it. So I definitely couldn’t live without lever shifting.

  6. bought my daughter a bike from Raleigh. its 1x and cable pull disc brakes. it weighs like 27lbs. not too bad, all things considered. as she wears parts out, ill swap out parts.

  7. Doddy loving the tech. I've Just bought a new Nukeproof mega carbon 275rs and i have a problem the bottle cage has to mount to the under side of the down tube. I don't want to put it there, (roost, looks) i'm trying to get away from carrying a pack like everyone. Any NEAT solutions you know of for getting water on to the bike?? Thanks

  8. Listening to the comments about strapping stuff to your bike enduro style, i know this has become a big thing, but i ruined several pumps back in the day from carrying them on the bike through a british winter. For me a non-racer and self-funded the backpack keeps it all away from water, dirt etc that will shorten the life of tools and i'm guessing those straps do your paintwork no favours either after a ride or 2 in the clart.

  9. I've got an old 26" xc bike from 2010 with an aftermarket 160mm fork and want to make it into a super fun bike, I can either go 1×9 or singlespeed, what should I do

  10. I was listening to you talking about steering stems. What would happen if you turned the stem the opposite way so it faced you. .?

  11. the background music problem that everyone noticed on GCN with Emma Poole seems to be creeping onto the GCN tech show too. It's distracting and a bit annoying.

  12. #askGMBNtech Are the Ergon GA2 FAT grips soft and squishy like Gell grips? I like the comfort idea of the GA3 but i dont like the looks. I have Raceface Strafe grips on now and they are hard as a rock and give me hand fatigue.

  13. Doddy’s awesome.. he knows his shit… that’s coz he was assembled from bike parts and zip ties out of some English countryside shed.

  14. Love all the retro stuff. It's targeting my age demographic! I just might have to try out (again) the Panaracer Smoke/Darts in 650b.

  15. I am looking for new tyres and i need something that fits 700c wheels. something that is aggressive and also something that is between 40mm-45mm wide. What do you recommend? 🙂

  16. I have a 2017 scott genius 750. it has a 2×10 drivetrain, and I am thinking of upgrading to a sram nx. does my bike have a sram or shimano hub body, and what do a need for the sram nx. thanks.

  17. I had dual control Shimano XT and the shop couldn’t keep it adjusted correctly. It was hard not to skip gears upshifting even on pavement.

  18. I asked this on ask gmbn but I’ll do it here too:
    I have a 29+ with 180mm rotors front and rear. I only weigh 138, so about 170 max with bike and gear. There are no big long descents where I live. Am I over braked? Would a 160/160 be fine or a 180/160? If I can save the weight of smaller rotors I want to. Or does the 29+ whee have anything to do with using bigger rotors? I have rt54’s now and would get xtr rt99’s if that plays in. Any input from riders of my weight is appreciated.

  19. Great series, Doddy is awesome, love all the historical stuff from the 90's… I just a kid but remember lusting after some of this stuff.

  20. I can’t believe USE are making two (30.9 & 31.6) dropper posts rather than just doing a 30.9 with a shim to “upsize” it.

    I ran a Thomson Elite Dropper like this for ages with no creaks or slipping. Plus, the alu shim protected the post from the steel of my Cotic BFe’s seat-tube 🙂 #topmods #rewind

    PS – loving this s channel.

  21. can add diy repair in the segment also… comparison on bb its endurance in mud environment etc.. i have big prob with my bb… always need to service everytime ride in wet condition… comparison between steel bearing ceramic etc

  22. LOVED seeing the return of the Panaracer Smoke and Dart tires. I've missed them and will have to run out and get a new set for my 1990 Mongoose IBOC Pro. Do you think we can convince them to make a 29er version so my newer bike can match?

  23. Thanks for the info on the Ergon grips, I already use a similarly shaped grip dud to my gnarled arthritic mitts, so I bought a pair!

  24. In the Bike Cave pictures I see a lot of bikes hanging on their front wheels on the wall. This is definitely a tidy and space saving way of storing bikes but I once read somewhere that this is not healthy for the bike, I think it had something to do with the fluids in the brake hoses. Is that true or not?

  25. Yes, kids bikes need more attention from manufacturers in the industry. They are almost away to heavy for kids ages 5-12.
    Giant, Salsa and Specialized have decent options in 2018. It’s great to learn about Hope Academy in this video. Thank you!

  26. How can you say thumb shifters were crap 😳 they were great. Nothing to go wrong, indexed and the option for friction shift if the indexing went out.

  27. loved the instagram and photography stuff lately. how do you carry your DLSR on when on your bike so you keep it safe? Photographers specific back pack, on the frame? Would love to know what you use to pack it all

  28. #askgmbntech Hey doddy, i've got some trouble with my shimano shifting unit. When I shift down with my rear cassette I get stuck between 2 gears and the chain makes some strange noises. How do I fix this problem?

  29. Loving the show! Only 4 episodes has been out yet and I love it more than shed show already. Shouldn't really say that lol. No seriously mint stuff Doddy! It's not a long enough too. 45 min should stop the craving we get for the next episode 😀

  30. Good to see those velcro straps on lace up shoes because i will never forget the time i stopped to wait for a friend at the top of a hill and my lace had wrapped around the pedal axle and i fell over sideways we laughed for ages

  31. Hi Doddy, do you know of any types of trays I can put my bike on when washing it off so I can channel all the muddy water down a drain rather than all over my patio flags that I have to pressure wash 3 times a year now instead of once and I hate that job, I’ve searched online but can’t see anything? Great job btw keep it up 👌🏻

  32. Doddy talking about a 20 mm stem, I measured mine the other day, came in at 11 cm. I like it, and am used to it, so I'm not gonna change it.

  33. Nice video. As always 🙂 I don't agree that goggles should be cheap though. Good glasses don't distort the vision; cheap ones do. Good tinted glasses have UV-protection; cheap ones don't (With dark glasses your pupils dilate and without a proper UV protection it's very bad for your eyes.) I don't use goggles but sports glasses, which cost me 400€ (including optical inserts). Worth every cent! Regarding bike wear there are many other things that actually are unreasonably expensive.

  34. Could you do a little explanation vid on GPS computers? I've read into them briefly but no idea how what you do for maps or what format you have to use etc. I mostly ride trail centres but I have recently started venturing into natural stuff here in the Lake District(skiddaw) but i would like to have the route on a GPS for longer routes as a fail safe. Cheers

  35. Instead of buying new forks, would it be possible to get a set of replacement longer legged fork tops and keep the lowers to save some cash and slacken the bike at the same time?

  36. about kids bikes, i'm 13 and i can fit a size small adult bike and i know some who is ten and he can fit an xs adult bike, so it gets loads easier to find kids bike as they get to about the age of ten.

  37. hey Doddy, you want retro tech? come to Bellingham, we've got a bike shop called the HUB and it's basically a museum of retro tech

  38. The Nukeproof Horizon wheelset you showed at the start of the show, I bought a set of them shortly after xmas. I'd love to tell you how they are on the trail, but my bike needs to be upgraded from a 135mm skewer rear wheel to the 142mm x 12mm axle. I have the drop out kit, but it is taking FOREVER for the bike shop to get the axle in stock so I have these bling wheels doing nothing.
    I can tell you they are easy to set up tubeless and that ratchet feels like it is going to be awesome when I get out on the trails again.

  39. #askgbmtech Doddy, have you got any tips on how to get rid of excessive bounce when pedalling uphill on my 2011 Giant Reign X0 with a 170mm travel from a Fox DHX Air 5 rear shock? Cheers, Ben

  40. Nightmare! I actually threw away a Panaracer Smoke and Dart a few weeks ago from around 1994. Wasn't much wrong with them either!

  41. I wanted to get some of these Ergon GA3 but could not find any in the UK. I got some Specialized Contour XC Grips instead. They have the wing as well and are really comfortable

  42. I had Panaracer Smoke both front and rear on a Diamondback, back in 1994. Great tyres for that time, their successor was a pair of Michelin Wildgripp'R.
    For nostalgia reasons, I put on my Madame's bike, a pair of Panaracer Fire XC 😉

  43. Great show. Question about my 2014 160mm Pike axle; how do I change where the axle lever hits its rotational end point? you know how you thread in the axle, then close the lever; spin too far and lever won;t close, don't spin enough and the lever doesn't have enough tension on it. I want to change where the lever is at its end point. Currently it sticks out the bottom of my fork(exposed to hitting rocks Etc), want to get it inline with lowers when properly closed. Thanks.

  44. hi i have a cannon dale supper v400 if i have to change my bottom bracket [a square tapered shaft] ,can i change it for something more modern such as a hollow tech bottom bracket

  45. That helmet looked like it never had a mark on it,, maybe light weight back protection is the way to go,, nice 👍 to see the guys back up and riding after that bad experience

  46. I absolutely love this channel! I’ve learned so much. I have lower back issues, so naturally I think suspension is the best thing since sliced bread! I’m an older rider, 67 and just getting back in the bike game . I have a lot of limitations but I am learning what those are and how to deal with them. One issue I have is my hands getting numb. Dropper post helps this because I can change my geometry and get some relief, enough to continue.thanks a lot ypall you guys. I know you are the face but behind the scenes I’m sure there are some unsung heroes that you would like to thank. Ditto that! Cheers from Oklahoma!

Leave a Reply

Your email address will not be published. Required fields are marked *