Spill Deck Bladder Systems – UltraTech International, Inc. 904-288-8195


The Ultra-Spill Deck Bladder Systems are a
one-of-a-kind, patented spill containment system for 1, 2 or 4 55-gallon drums. An optional ramp is quickly clipped onto the
side of the Spill Deck for easier loading and unloading. Because of its low-profile, 5 3/4″ height,
loading and unloading is much easier and safer compared to taller spill pallets. In the event of a spill or leak, liquid is
captured first in the Spill Deck sump. If a larger, more catastrophic spill should
occur, the bladder will automatically unfurl, providing an additional 55-gallons* of containment. After the spill has been captured, spilled
contents can be easily removed using a pump. Once spilled contents have been removed, discard
the bladder appropriately and replace it with a new one. To attach the bladder to the Spill Deck, first
remove the grate. Next, unscrew the nut from the bulkhead fitting
on the bladder, keeping in mind that it has left-hand threads. Carefully cut the label that holds the access
door closed during shipping. Next, cut the rubber bands that are around
the two ends of the rolled up bladder. Install the bladder attachment by putting
the bulkhead fitting through the pre-drilled hole and hand-tightening the nut on the other
end. Once the bladder has been installed, close
the access door and your Spill Deck Bladder System is now ready to be used. For more information on the Ultra-Spill Deck
Bladder Systems or any of our other spill containment products please call us at 800-353-1611
or visit us on the web at www.spillcontainment.com.

, , , , , , , , ,

Post navigation

Leave a Reply

Your email address will not be published. Required fields are marked *